Language: English
Seconds ahead

Training courses

CHIRON courses, training courses and seminars for CNC cutting

To enable you to use your CHIRON CNC machining center optimally, we offer a comprehensive range of qualification measures, training courses and training for operators, setup personnel and service technicians.

CHIRON Training Center: CNC machine courses and programming courses

In the CHIRON Training Center, we get interested persons, both beginners and pros, up-to-date with the latest technology, step by step. With a number of individually combinable machine courses and programming courses. In this way we qualify your employees while increasing the productivity of your CHIRON CNC machining center. This leads to more success for your company, since qualified and motivated employees are an important success factor.

CHIRON training courses and training are available for the following topics

Gaining the lead by knowledge: Training courses with a practical orientation

Our training courses are designed didactically according to the latest teaching methods. By doing practical work in small groups, we take into account the field of interest and the level of knowledge of the participants. Our philosophy is to strongly qualify the participants through their own work on our training objects. Subsequently, what has been learned can be directly put into practice in routine work.

CHIRON training program in Tuttlingen or on-site with you

Courses can either be given in our CHIRON Training Center in Tuttlingen or in-house at your site, as you prefer. Our trainers are able to carry out the training courses offered in German and English. Other languages are possible by means of an interpreter.

All information can be downloaded on our Training brochure.pdf (1.75 MB)

Our Training Director Frank Ritter will be happy to advise you.
Phone +49 7461 940 3307
E-mail training(at)chiron.de

Service Operation Programming Components Robot Customer-specific Contact

Service and maintenance

Individual training courses on machining centers with swivel head, MT technology, basket and chain tool changers as well as for 5-axis machining centers

  • Goal
    Carrying out maintenance activities according to schedule, detection and rectification of faults to a limited extent
  • Target group
    Service, maintenance and repair personnel
  • Prerequisites
    Basic knowledge about how to work with CNC machining centres, technical vocational training or practical experience with CNC machining centres
  • Duration and location | Participants
    4 days, CHIRON Tuttlingen | max. 5 participants

Operation

2 or 3 days of training

  • Goal
    Understanding of the basic operation of the machine
  • Target group
    Operators, setters, maintenance and service personnel
  • Prerequisites
    No or little basic knowledge of CNC programming
  • Location | Number of participants
    CHIRON Tuttlingen | max. 5 participants

Further information and details can be found in our training brochure Training brochure.pdf (1.75 MB)

Programming

Basic course, programming

  • Goal
    Creating operating programs and entering them in the control
  • Target group
    Operators, setters and programmers
  • Prerequisites
    No or little basic knowledge of CNC programming
  • Duration and location | Participants
    4 DAYS, CHIRON Tuttlingen | max. 10 participants

Advanced course, programming

  • Goal
    After the programming training has been completed, the training participant should be able to create drilling and contour programs and enter these in the control.
  • Target group
    Operators, setters and programmers
  • Prerequisites
    Basic Siemens programming training course or basic knowledge of CNC programming
  • Duration and location | Participants
    5 DAYS, CHIRON Tuttlingen | max. 10 participants

Programming training, swivel cycles for table kinematics

  • Goal
    After completing training, the training participants should be able to practically use table kinematics swivel cycles.
  • Target group
    Operators, setters and programmers
  • Prerequisites
    DIN / ISO programming knowledge and its practical application
  • Duration and location | Participants
    5 days, CHIRON Tuttlingen | max. 5 participants

Programming training, swivel cycles for swivel head kinematics

  • Goal
    After completing training, the training participants should be able to practically use swivel head kinematics swivel cycles.
  • Target group
    Machine operators, setters and programmers
  • Prerequisites
    DIN / ISO programming knowledge and its practical application
  • Duration and location | Participants
    5 days, CHIRON Tuttlingen | max. 5 participants

Programming training for machining centres with MT technology

  • Goal
    After the programming training has been completed, the training participant should be able to create turning and milling programs and run these on several channels.
  • Target group
    Machine operators, setters and programmers
  • Prerequisites
    DIN / ISO programming knowledge, swivel cycles and their practical application.
  • Duration and location | Participants
    5 DAYS, CHIRON Tuttlingen | max. 3 participants

Programming training, probes

  • Goal
    After completing the probe training, the training participants should be able to practically use measurement programs and probes.
  • Target group
    Machine operators, setters and programmers
  • Prerequisites
    Basic knowledge in the operation of the respective Siemens / Fanuc / Heidenhain control.
  • Duration and location | Participants
    2 DAYS, CHIRON Tuttlingen | max. 5 participants

Components

Balancing the main spindle

  • Goal
    After completing balancing training, the training participants should be able to understand the setup and how to use the balancing device.
  • Target group
    Maintenance and service personnel
  • Prerequisites
    CHIRON service training, experience working with PC/laptop, programming knowledge
  • Duration and location | Participants
    2 DAYS, CHIRON Tuttlingen | max. 5 participants

Circularity test with Renishaw Ballbar QC20

  • Goal
    After completing training, the training participants should be able to understand the setup and how to use the Renishaw Ballbar.
  • Target group
    Maintenance and service personnel
  • Prerequisites
    CHIRON service training, experience working with PC/laptop, programming knowledge
  • Duration and location | Participants
    2 DAYS, CHIRON Tuttlingen | max. 5 participants

Training DATALine

  • Goal
    After the training, the participant should be able to profit in an optimal manner from the data / operating figures, to configure DATALine according to customer’s specifications and to adapt it to the intra-company needs.
  • Topics
    Bases of calculation of the OEE figures
    Optimization based on the OEE analysis and loss of availability
    Identification of non-productive time of operation
    Dashboard – Overview of the production

    Configuration:
    - Adaption of the machining program (start-end-factor)
    - Definition of the shift schedule
    - Definition of the downtime reason for iQuit
    - Sending of e-mails
    - Utilization of NC logger
    - Parts Overview, to find the outliers in the parts run-time
  • Target group
    Production managers, Group leaders
  • Prerequisites
    Knowledge of the intra-company processes of the production line
  • Duration and location | Participants
    4 hours, CHIRON Tuttlingen | max. 5 participants

Further information and details can be found in our training brochure Training brochure.pdf (1.75 MB)

Robot

Fanuc robot training

  • Goal
    After completing robot training, the training participants should be able to operate the robot properly and to use it in setup mode taking the safety guidelines into account.
  • Target group
    Operators, setters, programmers and service/maintenance personnel
  • Prerequisites
    Technically-oriented vocational training or comparable practical experience
  • Duration and location | Participants
    3 days, CHIRON Tuttlingen | max. 5 participants

Customized workshops by CHIRON

  • On request, CHIRON offers customized workshops that our training staff design specifically for your applications and tasks. We determine the contents in close consultation with you, just as the number of participants.

Further information and details can be found in our training brochure Training brochure.pdf (1.75 MB)

Please contact us

Please fill out all fields marked with * and select your training course. We will contact you shortly. To correctly process your request, we require the following information:

I am interested in following training course

I have read the data protection information and agree to the processing and electronic storage of my personal data in accordance with the data protection policy. I can cancel this approval at any time.